Question about slimline 3
I have a D12-700 receiver hooked up to a slimline 3 with PI, before this I had it setup with a 3-lnb legacy setup with mutiswitch. With this first setup I had local's, now I do not. Also I noticed whe...
Forum Discussion
mikestock wrote:
The problem is that a D12-700 is SD only. It doesn't even recognize the 99 or 103 satellites. I don't believe it works with SWM. As Bill said, you may be in one of those areas that use the 110 or 119 for locals. In that case you need a SL 5 or Phase III dish. Never need a B-Band converter, as it is for the Ku (99/103) satellites.
I also have the HR24 in the house just dont take it with me because the D12 is alot smaller & I dont care if I have HD in the RV. I switched from a 3 lnb to swm 3 to make a little easier to hook up the 2nd TV (but a bigger pain in the butt with bigger dish):R. I have the SL 5 on the roof and for the b-band converter thing it was installed when they put my system in a couple of years ago, I guess their tech's need a little more training.
