Radio Shack amp & Winegard: Update w/ HDTV
A while back, someone from MN or MI said a Radio Shack antenna amp added to the amplified barwing w/ a wingman would radically improve reception. Can you tell me which amp from RS, and how it must...
Forum Discussion
I need help testing powered part of barwing. I looked at the top coax connection - boot is in good shape and doing a good job protecting connection which came off and went back on smoothly.
I push on the wall plate amp button and the green LED is on. Test read 9.7 V on a 9 V radio battery, so volt meter is OK.
At wall plate coax, Put one test lead to center coax wire and other to outer threads. Volt meter will no stabilize w/ or w/o LED pushed in (amp on).
Am I doing this right?
Is there another way to test batwing amp?
I push on the wall plate amp button and the green LED is on. Test read 9.7 V on a 9 V radio battery, so volt meter is OK.
At wall plate coax, Put one test lead to center coax wire and other to outer threads. Volt meter will no stabilize w/ or w/o LED pushed in (amp on).
Am I doing this right?
Is there another way to test batwing amp?
