Forum Discussion
Phils
Jun 17, 2014Explorer
PennyPA wrote:
Ed and Phil: I, too, got the tv4rv tripod and, even though we've not set it up yet, think we're going to like it. Anyway, my question: Currently my dish is set up on a metal frame on the ground with 4 cement blocks in the corners. There are 2 ground wires...one goes to the "splitter" that was attached to the frame and the other was on a self-tapping screw on the frame. They both come off the LNB cable. In preparation for when we can use the tripod, I've moved the splitter to the back and installed it on the thing that holds the dish on. That is where the one ground wire is going to go but where do I attach the other one since there will be no metal from the tripod touching the ground. Can I just drive a 10" stake into the ground and attach it there?
I don't have any grounds when I use the dish so I'm not understanding your question.
We have a 3-LNB dish, with two coax connections from them --- one to my receiver and one to my brother's when he vacations with us. I hook nothing more up to the dish.
Phil
About RV Must Haves
Have a product you cannot live without? Share it with the community!8,793 PostsLatest Activity: Aug 22, 2023