Router setup as a Wireless bridge

Yes, this can be done.

If I understand your current setup, your current extender would provide the WAN to your RV network. There are tutorials out there, I know there are members that have done this. They will likely chime in soon. I have a link saved somewhere, I'll see if I can find it.

The DD-WRT software will what you ask. It will end up essentially as a passworded repeater that you connect all your devices to. Your router does a search, you find what you want to, add password if required, and done. Your "local" password can (and should) be different from that talking to the host and can be fixed so you don't have to reconfigure things other than the router each time.

As far as being "secure", that's a different story. If you are talking to an open AP at Walmart or a CG, someone that knows what they're doing can still get to you although I've never heard it done.

I would set the router up to use a VPN as well, which would do a very good job securing your network, so you would connect to your router, which would connect via a vpn and the free wifi signal, vpn keeping everything encrypted and private.

We used to plug in the VERIZON AIR CARD into a router at our work sites and use both Wireless and wired connections coming from the router... Worked out flawlessly...

My VERIZON MIFI box gives my a good wireless range on its own. I can get much more range having it sitting in a WILSON SLEEK cradle which has an outside antenna in my POPUP trailer up behind the valance curtains. Then we can connect to the internet with up to five devices all around the camp site with no problem... This is an secured network as well...

There may be some legal rules issues about relaying someone elses WIRELESS NETWORK..

Roy Ken

Some wireless routers support "WISP mode", which should do what you want.

The TP-Link TL-WR743ND is an example of one which should be able to be configured to do what you want. This isn't a recommendation - I've never worked with one. It was just one which came up on a simple search. Search for "WISP mode router" to find others.

They call it "Client Router Mode," where it would connect to the campground WLAN (via your existing repeater), and then create a separate, private WLAN.

When connecting to a campground WLAN, you'd need to configure it to make the connection. After that connection is made, connect your device(s) via the private wireless.

Edit: that will give you a private local wireless, but won't stop others from going through your repeater. If you want to do that to avoid sharing that bandwidth, you'd need 2 routers/APs - one in client mode connected to the directional antenna in place of your repeater, then another configured as a normal wireless router to provide your local WLAN. Then connect them back-to-back via Ethernet.

This is what I use.

Sure -you can do it yourself, but for $110 I went with the Rokland "Alfa WiFi Camp Pro" kit.

The advantage of these kits over the DIY approach is that you'll have a UI that's setup to get you where you want quickly. I have a DD-WRT router too, at home, and I'm not entirely sure how I'd get the same user experience I get with the kit.

The kit comes with an Alfa R36 router. After powering things up, you http log into the R36, and click the 'Scan' button. It'll list out all of the networks it sees.

Pick the one you want and click, 'Next' then up pops a page for your log-in credentials. One more click and you're setting up your internal RV network.


I hung a small 5 port switch off the pack of my R36, so I have a wired and wireless internal network in the coach. And the ability to bridge to another Wifi network, outside.

Can you roll your own?
Yeah, probably.

But for $110, it was easier for me to throw money at it.

I really appreciate everyones help. I am now connected, but not yet how I want. Still having a couple issues. Here is what I did. Maybe someone can direct me where I am messing up. I had an old Linksys WRT54GL, and I was able to change the firmware to DDWRT. After looking at their tutorial and countless videos, i set up a repeater bridge. I am connected, but the issue I am having is with the security. I have no issue connecting to the park wifi as a simple repeater. I have trouble when I add a virtual interface. I can set that up as a completely different SSID, but when the password is different than the password of the park wifi network, it doesn't work. Also, if I disable security, it works, but for obvious reasons, I don't want to do that. Even on the WW-DRT wiki for setting up a virtual interface is says the password has to be the same as the router you are connecting to. I also have not set up a VPN yet, but I am going to try to do that. I am not sure how that works with a repeater instead of a regular router. Everywhere I read says I need a WAN IP to set up a VPN, but when the router is set as a repeater or a repeater bridge, WAN is disabled. For now I am connected, but I am hoping someone has some tips to help me set it up how I was hoping. Thanks again everyone for your help.

My Netgear Range Extender adds a password choice along with the .ext suffix identity as opposed to the router, a Netgear AC1900. I paid $ 29.00 at a Fry's Electronics sale, retail was $ 59.00. Works without issue and has an ethernet jack to boot. I think you need both a router and an extender that are compatible, in your case, my guess is they are not compatible and preventing a different password.

Disclaimer: I'm not a computer professional, but my father co-wrote cobol, fortran, and parts of basic...and set up the TRACON systems that get me home safely by air. I wanted to be a scientist. YMMV. :B

Use the Linksys WRT54GL to connect to the campground. Then a short piece of Cat5 to another router that is your hotspot. This gives you a hardware firewall to outside and security on your wireless. You get better speed also as each wireless connection is only to 1 location, and not switching between two.