SWM - Dome Plus Traveler SK3005
I am converting my SK3005 Winegard to SWM so that I can run a Genie H44. From the diagrams, I see that I will use all four ports for the 3005. I have a KVH tracking sat as well and would like to use...
Forum Discussion
Thanks Bill,
I was hoping it would be easy, but I will probably use an A/B switch and reset the dish type and multiswitch on the H44 to use the tracking dome while on the road. When we get into port and lift the sk3005, we will switch back to the slim-5 and swm settings.
We just upgraded all of our electronics to 4k UHD and I was trying to make the switching automatic. We may just end up recording the music to a CF card and play that back during travels. We have active noise cancellation and our B&O system is very sweet driving down the road.
Thanks
Bob
I was hoping it would be easy, but I will probably use an A/B switch and reset the dish type and multiswitch on the H44 to use the tracking dome while on the road. When we get into port and lift the sk3005, we will switch back to the slim-5 and swm settings.
We just upgraded all of our electronics to 4k UHD and I was trying to make the switching automatic. We may just end up recording the music to a CF card and play that back during travels. We have active noise cancellation and our B&O system is very sweet driving down the road.
Thanks
Bob
