Tailgater Problem
My Tailgater hangs up on the second bar of "acquiring signal". Guy at King Controls says it is not the Tailgater. Folks at dish replaced the receiver, and it set up properly. Then I disconnected th...
Forum Discussion
We had the same problem last month, it turned out being the connector where the coax connected to the trailer. I also found out that the coax connections have to be tight, hand tight like I did with a my tripod didn't work just take a wrench and snug it up. Remember the power to the servo motors comes through the coax so it needs good solid connections.
Denny
Denny
