OK I used the number 1 input so I got lucky there. That makes sense now that because I chose a non hd dish that I can't select to show hd channels. I was doing this manually because from what I have read while searching for info, I needed to set up the receiver first, then power up the sat dish and let it find the 101 sat. Remember, I'm a complete newby with sat tv, especially in an rv setting, so I'm going entirely by what information I can find online. I bought the RV used and it came with the roof mounted dish, so I can't say for certain if the LNB is good or bad, but on the signal strength page it was showing a 96 signal for sat 101. I don't know if that can confirm the state of the LNB or not.
What does the signal refresh do, is it something I would have to do online? Would it mess anything up with my home setup?
Thanks again everyone for the help.
