TV with 14v brick, okay at 12.x volts?
I'm looking at a Samsung TV which has a 14v power supply brick. I would like to run the TV directly off the DC side of the RV. I expect it would be pretty good in the range of converter voltages of 1...
Forum Discussion
I found that I get an interference signal when feeding the DVD signal from the dash head unit to the TV, when the TV is directly powered by 12v. The interference goes away when I power the TV from 110v thru its brick. The brick 14v output cable has a small wart on it to do some kind of filtering or noise prevention. My homemade cig plug cable does not.
The TV works perfectly otherwise. The DVD is fed through low quality red/white/yellow AV cables. But as I say, it comes through fine when the TV is powered by its brick.
We hardly ever play DVDs,
We could power the TV by brick when we want to play a DVD,
Including by inverter if need be.
But I'm curious as to the problem.
The TV works perfectly otherwise. The DVD is fed through low quality red/white/yellow AV cables. But as I say, it comes through fine when the TV is powered by its brick.
We hardly ever play DVDs,
We could power the TV by brick when we want to play a DVD,
Including by inverter if need be.
But I'm curious as to the problem.
