WiFi network

Chris Bryant wrote:
They also said the toner costs more than the printer.

That is the reality for many mid/low end printers and not unique to this printer.

Chris Bryant wrote:
No offence, but that printer got horrible reviews. According to amazon, it is wifi direct capable- I looked at their awful website, but could not find a manual to read. According to most reviews, the wifi doesn't work reliably, it needs a wired usb connection. They also said the toner costs more than the printer.

I got the printer for $25 including free shipping. I just want to use it very little, and the toner that comes with it is good for 700 copies (that would last me many years). if it is no good, I can throw it away without any big monetary loss.

So long as it is your router (A Jet pack is part router) yes, you can connect printer and computer via it provided your do not have too many "Clients" on the router (Most Jet Packs are client limited, often to five)

I have 9 clients here and am working on more
Computer (laptops) 1`and 2
Server 1 (Desktop)
ReplayTV 1 and 2
Phone
Tablet
printer
Chromnecast
Want a 3rd laptop or cromebook (I'm really using laptop 2 for an off-purchase reason job that a chromebook could do as easily)

Am wanting a Raspberry PI as well (May replace the Chromecast cause it is not exactly as advertised (no surprise)

One comnputer is used mostly for "Plan B" motgor home repair (Plan B is to win PCH,, Least you think I'm holding my breath Plan A is more likely to happen and in fact should be ready about the 1st of the year.. If not sooner.. But Plan B would be nice Very nice)

Absolutely!

I am using an Ellipsis Jet Pack from Verizon. Also in the market for a new printer. Can my computer connect to printer using the Jet Pack?

Thanks
DICK

Sorry, I did not see any info about Wi-Fi direct. I did not mean to mislead you, I just could not find that information.

No offence, but that printer got horrible reviews. According to amazon, it is wifi direct capable- I looked at their awful website, but could not find a manual to read. According to most reviews, the wifi doesn't work reliably, it needs a wired usb connection. They also said the toner costs more than the printer.

Your only wireless option is Wireless 802.11b/g/n so you will need a router. You need a CHEAP router. Linksys is easy to work with and pretty cheap and D-Link is another. You should be able to pick one up new for less than $50.

joebedford wrote:
What printer did you buy? I'll tell you in 2 minutes if you need a router or not.

I bought a Pantum P2502. God that on a Newegg special.

The problem.. YOu get internet via one of several paths.
Two Way Satellite Internet... You should have a router in place, Same as hooking up via a cable internet at home only with the Sat Modem instead of the cable modem.

Cellular.. SOME hot spots will let you connect both computer and some will not. Mine does. but I never use it that way.

Park-Wi-Fi.. Generally you can NOT connect your printer to the park system, Reason is if you could then everyone in the park could use your printer. Thus in any properly set up park the router will not allow sharing of devices. or Computer to Comptuer transfer eitehr.

My Solution: Model 1 and 2
When I set up this RV I had an old vintage LINKSYS WGA-54G, Wireless Game Adapter (no longer made) this is basically a "Modem" but for Wi-Fi. IT is connected to the park, On the back side there is a Registered Jack (RG-11) wher I can plug in my good old Cat-5 Cable. This runs to a ROUTER in the RV same as if I had cable Internet at home.

I did change the 3rd Octet of my router to something strange (say 7 or 9, Avoid zero and multiples of five (5,10,15,20) I let the "WAN" side be Automatic (let the park assign) less I need to access the modem (Modem is 192.168.1.250 so the Router has to be 192.168.1.xxx (any number between 1 and 254 other than 250) to access the modem.

Option 2:

I also have a TP-Link TL-MR3040

This is also a discontinued product. though the company does make other devices that work the same way.

This is a multi function device.. I can run a cat-5 cable to a modem and use it as a Wi-Fi access point.
I can use it as a Wi-Fi modem feeding my existing router

It is also a Wi-Fi Repeater.

In that mode I can allow it to connect to the park (Actually I need to run Quick setup to do that) and then connect multiple comptuers, printers and such to it.

I have a special need which is why I use the more complex WGA/Router system (Several devices insist on Cat-5, not Wi-Fi)

OPtion 3: Many printers,,,, Mine included. Even though they are "Wi-Fi" still ahve USB ports.. Mine works that way. when it is that it works (Long story, if it gets too hot it fails to work. happened once last month).