winegard automatic swm3 antenna
"No LNB Voltage". Does anybody know where the problem may be? It worked fine last trip but now the dish turns completely upside down with the LNB arm vertical. Makes one revolution and back, then stow...
Forum Discussion
Two possible issues
1: he pulled slightly on the coax and it came, Slightly out of the connector. Story follows.
2: he soaked something not to be soaked (low odds if it's on the roof because GOD soaks most of what's up there from time to time)
Story:
After I moped my roof the OTA antenna did not work.
Dug into the roof (There was a clamshell I had to dig out and unscrew) and just there was a set of 3 connectors. Two Male F-Connectors on on the cable from the box inside and one to the antenna. and a barrel connector.. Rusted to beat the band..
I re-dressed both cables (Cut off a small bit and put on new connectors. WEATHER PROOF connectors) and a new double female (barrel) and ... TA-DA. it worked. 100 percent. Continued to work up to mid-october when .... Well I stopped using it. (Far as I know it still works)
1: he pulled slightly on the coax and it came, Slightly out of the connector. Story follows.
2: he soaked something not to be soaked (low odds if it's on the roof because GOD soaks most of what's up there from time to time)
Story:
After I moped my roof the OTA antenna did not work.
Dug into the roof (There was a clamshell I had to dig out and unscrew) and just there was a set of 3 connectors. Two Male F-Connectors on on the cable from the box inside and one to the antenna. and a barrel connector.. Rusted to beat the band..
I re-dressed both cables (Cut off a small bit and put on new connectors. WEATHER PROOF connectors) and a new double female (barrel) and ... TA-DA. it worked. 100 percent. Continued to work up to mid-october when .... Well I stopped using it. (Far as I know it still works)
