Winegard carry out with HR44-500
Sorry if this has been asked and answered but I missed if it was. I'd like to get the Winegard Carryout to use with my existing HR44-500 from my home. I've read some things certain dishes that fe...
Forum Discussion
Here's my HR44 list and most of these items don't change when I remove the receiver. But I keep the list handy and it was a carry over from the more involved HR24 move.
Home and MH – SWM Dish and HD Channels
1. Turn on receiver wait for setup to complete (about 2.5 minutes).
2. Menu-Settings & Help-Settings-Display-TV Ratio: Widescreen 16:9
3. Menu-Settings & Help-Settings- Display -TV Resolutions: Check all resolutions for Home
a. Use 720 for MH TV, however the resolution is automatically detected with the HDMI interface.
4. Menu-Settings & Help-Settings- Display – Video: Off, Pillar Box, Dark Gray – Native On increases channel change time
5. Menu-Settings & Help-Settings-Display-Preferences-Guide HD Channels: Hide SD duplicates.
6. Menu-Settings & Help-Settings -Satellite-View Signal Strength: 96% on all 5 tuners
7. Menu-Settings & Help-Settings -Satellite-Repeat Satellite Setup: Dish setup: Option 17 – Slimline 3S (SWM): Switch Type: 01: SWM (cannot change).
Home and MH – SWM Dish and HD Channels
1. Turn on receiver wait for setup to complete (about 2.5 minutes).
2. Menu-Settings & Help-Settings-Display-TV Ratio: Widescreen 16:9
3. Menu-Settings & Help-Settings- Display -TV Resolutions: Check all resolutions for Home
a. Use 720 for MH TV, however the resolution is automatically detected with the HDMI interface.
4. Menu-Settings & Help-Settings- Display – Video: Off, Pillar Box, Dark Gray – Native On increases channel change time
5. Menu-Settings & Help-Settings-Display-Preferences-Guide HD Channels: Hide SD duplicates.
6. Menu-Settings & Help-Settings -Satellite-View Signal Strength: 96% on all 5 tuners
7. Menu-Settings & Help-Settings -Satellite-Repeat Satellite Setup: Dish setup: Option 17 – Slimline 3S (SWM): Switch Type: 01: SWM (cannot change).
