Winegard Parhways X2 Satellite Antenna

I've got the Pathway X2, and 2 receivers. I also have an in-motion dish on the roof. Usually, I use the rooftop for the primary receiver, and the Pathway for the secondary. However, if I'm "treed in", I'll use the Pathway for both receivers. The issue with using the dual output on the Pathway is that if you choose 2 receivers when you set up, the Pathway will only zero in on satellite 72. You won't get all your channels. But, you can select 1 receiver when set up, and run the secondary cable to the secondary receiver. When you do that, on your secondary receiver, you will only get the channels that are broadcast on the satellite that your primary receiver is pointing the dish at.