Wingard portable dish mounting

IMG_0089 by raindancephoto, on Flickr
IMG_0088 by raindancephoto, on Flickr
IMG_0087 by raindancephoto, on Flickr

I can't claim the method I'm about to describe as my own but this came from someone else on this Forum several years ago.

The tripod that is an accessory for the dome can have the legs removed. Bought three stainless L brackets (on Amazon) with holes on one end that were 1" apart, if memory serves. Attached the L brackets to the tripod base and mounted to the roof in place of the old non-working sat dish. Once the feet for the dome are inserted in the base and the slight turn locks in place, I use a bungie cord to insure it won't turn out. Many, many miles, wind, snow, ice... you name it and that dome mount has lived through it.

So, now, what I have is either mounted or, if under trees, removable and placed out from under.

Note: I did buy an additional proprietary wire/plug to connect to the power on the roof. I also added a on/off switch to the interior box that used to house the old sat dish controls so that, when it's time to move, I just kill the power to the dome. When I get to my destination, I flip the switch and turn on the receiver.

Illinois to Florida to Texas and back to Illinois as well as shorter trips with no problems. Never have had to take it down since mounted over three years ago.

Same here, have never had the need to remove it it over three years....

haydoracin wrote:
I have the Winegard ladder mount and have not had any problems. I leave it mounted there semi-permanent but can remove it if I needed to if blocked by trees.

haydoracin wrote:
I have the Winegard ladder mount and have not had any problems. I leave it mounted there semi-permanent but can remove it if I needed to if blocked by trees.

Do you leave there when traveling? Any issues with it being exposed to rain and cold weather?

I have the Winegard ladder mount and have not had any problems. I leave it mounted there semi-permanent but can remove it if I needed to if blocked by trees.

I went into Wingards website and they have several different mounts. I think I can come up with something using their designs.

does your rear ladder curve over the roof? if so you could make a platform on the horizontal bars to mount the dish to. just leave it mounted there.
bumpy