Wingard Video Distribution Center
I have a Wingard Video Distribution Center model VS53DVD/VS5312D. It is wired direct with a 12V. However, when I try to power up the system, it does not come on. I checked the 12V hookup behind the ...
Forum Discussion
So, power is not your issue. The signal from the VCC does not go to component. You select 3 or 4 and then do a channel scan on your TV allowing it to find analog channel 3 or 4 on the "air/TV" setting on your TV (same as watching OTA TV). That's where the signal from. You turn your TV to channel 3 or 4 and watch your DVD that way. It won't be HD but it will still be a good picture.
