Wingard Video Distribution Center
I have a Wingard Video Distribution Center model VS53DVD/VS5312D. It is wired direct with a 12V. However, when I try to power up the system, it does not come on. I checked the 12V hookup behind the ...
Forum Discussion
When you say it doesn't power up, are you thinking of the red indicator?
The indicator comes on only when power is set to the antenna amplifier in the head. If there is a problem in coax or antenna head red LED will not come on. According to manual, as I said earlier disconnect the coax to the antenna and see if indicator comes on. Read my previous post and look at troubleshooting in the manual I linked.
From manual:
If power is being supplied to the control box and the light still does not go on when pushing the TV Antenna
Power Button, disconnect the coax from the jack labeled “From Antenna” on the back of the control box. If
the light now comes on, there is a short in your coax cable going to the outside antenna, or the amplifier in
your antenna is bad.
The indicator comes on only when power is set to the antenna amplifier in the head. If there is a problem in coax or antenna head red LED will not come on. According to manual, as I said earlier disconnect the coax to the antenna and see if indicator comes on. Read my previous post and look at troubleshooting in the manual I linked.
From manual:
If power is being supplied to the control box and the light still does not go on when pushing the TV Antenna
Power Button, disconnect the coax from the jack labeled “From Antenna” on the back of the control box. If
the light now comes on, there is a short in your coax cable going to the outside antenna, or the amplifier in
your antenna is bad.
