Ball section on WDH slipped.
Things we learn the hard way. I accidentally hit a very large dip in a parking lot a little too fast that was way deeper than I thought. The pressure was too much for my hitch and forced it to move. T...
Forum Discussion
There is a bolt at the bottom of my Equalizer specifically to keep the hitch head tight against the shank when tightening the through bolts. I break out the 3/4" drive tools to tighten those nuts, the manual on my hitch specifies 350-400 ft/lbs torque on those bolts, which is even pushing it for a 1/2" impact.
