Forum Discussion
boshog
Jan 25, 2016Explorer
Selecting heavy electric or any of the three other modes makes no difference. The manual ITBM slider will not put out full voltage either, it too is limited to 70% under 30MPH which makes it difficult to set the gain.
I did get a response from a quality engineer at RAM, the 70% output at low speeds was done to limit chucking, I tried to get a definition of what he was talking about but he had no first hand knowledge and was reading it.
There is a wealth of information in these threads;
http://www.rv.net/forum/index.cfm/fuseaction/thread/tid/28486687/gotomsg/28689127.cfm#28689127
http://www.ramforum.com/f119/brake_controller-71708/
I did get a response from a quality engineer at RAM, the 70% output at low speeds was done to limit chucking, I tried to get a definition of what he was talking about but he had no first hand knowledge and was reading it.
There is a wealth of information in these threads;
http://www.rv.net/forum/index.cfm/fuseaction/thread/tid/28486687/gotomsg/28689127.cfm#28689127
http://www.ramforum.com/f119/brake_controller-71708/
About RV Tips & Tricks
Looking for advice before your next adventure? Look no further.25,115 PostsLatest Activity: Mar 04, 2025