Excellent article on brake and wheel bearings! Good job explaining the process so even "your Grandma" can do it. :B
My only caution is when drying the bearings after washing them. NEVER under any circumstances "spin" the bearing with high pressure! The cage used to hold the bearing rollers is only ment to hold the rollers in alignment when installed in the outer race. The rollers can fly out of the cage by centrifugal force when spun at high speeds. If that happens one can ruin a bearing or worse lose an eye or teeth! If you must use air pressure, use "canned air" like is used to clean computer keyboards (Radio Shack), turn down the air pressure to less than 20psi AND hold the bearing cage so it doesn't spin.
IHnutz
