Are There Anti-Sway Options 2.5" Hitch?
I recently purchased a 2016 Ford F250 to replace my older Yukon. I have a WDH with a 2" shank but now I need a 2.5" shank to fit (not comfortable with the sleeve I've been using). I no longer need to ...
Forum Discussion
Never seen a FACTORY non-WDH ball mount that had a friction sway control ball. Seen a few where someone had welded one on.
I would just do as the others have recommnended, and get a 2.5" shank for the WDH and use the hitch head, just without the bars.
Frankly I would either upgrade to an integrated WDH/sway control, or not use one at all, but that's a different discussion. Odds are your truck's front does rise about an inch, but it's not really enough to be a bother on a truck that size.
I would just do as the others have recommnended, and get a 2.5" shank for the WDH and use the hitch head, just without the bars.
Frankly I would either upgrade to an integrated WDH/sway control, or not use one at all, but that's a different discussion. Odds are your truck's front does rise about an inch, but it's not really enough to be a bother on a truck that size.
