Atwood Furnace AND Fridge work intermittant
Hello All - The last couple of seasons we've had intermittent furnace issues. Atwood 8500 series iii. After non-use for a period of time (weeks to months) furnace goes through normal lighting proced...
Forum Discussion
YC 1 - Hmm, there might be a voltage problem, but remember up until just this last week we've ALWAYS been on shore power, and yet we had the furnace problem for the last 2 seasons. Now we have 2 Duracell GC2s in series. My DCM meter (poor mans Trimetric) this morning showed 12.75 volts. I DO also have a portable digital volt meter, but I'm not well versed on it, so haven't checked voltage to any particular parts of either the furnace OR the fridge. All I've done with it is check the batteries directly to confirm the DCM was correct. Any advice as to how to set the DVM to check voltage on the various items? I have this DVM http://www.harborfreight.com/ac-dc-digital-multimeter-37772.html
Thank you for your help.
Thank you for your help.
