bearing buddies
What's the deal with the bearing buddies or they good or bad for the axles?
Forum Discussion
If you plan on adding them you need to replaces the rear seal with a double lip seal… the newer ones are designed to maintain about 3 PSI of pressure to keep water from entering then the axle cools quickly from being submerge in water… the newer ones also have weep drains that will ooze some grease when full… the older ones didn’t have this feature…
Care and closely following directions will yield good results, but (mostly) improper use and the older style have ruined more seals the anything…
Care and closely following directions will yield good results, but (mostly) improper use and the older style have ruined more seals the anything…
