Blackstone griddle regulator adapt
Looking at said griddle. Wondered if someone had removed the regulator & plumbed to the external gas outlet . Like I’ve already done on a weber Q. Fittings on the blackstone are not like a Q.
Forum Discussion
golf_bears wrote:
Nunyadamn, Can you elaborate more on your solution with perhaps some pictures. I have a Coleman grill that I would like to connect to the RV external LP line. The grill connection has a "goose neck" connector to the grill after the regulator. Two regulators in series doesn't cut it, not much heat.
Here is my coleman connection - just remove the stainless piece that goes into the brass piece and put on a 1/4" Female Pipe x 1/8" Male Pipe elbow like in my picture:
Top Coleman Modified vs blackstone not modified
Here is the elbow I used:
Anderson 1/4 to 1/8 elbow
Buy a 1/4" Male x 1/8" Female so you can still use the small bottles if needed:
1/4" Male x 1/8" Female
Here is how that looks:
Regulator with quick disconnect
Quick with regulator
This is the quick disconnect set I used:
Camco 59853
I did the same thing with my camp chef fire pit and I plan on doing it with the two propane tabletop heaters I just bought. The blackstone will be just as easy.
