Blue ox light cable
Blue ox seven pin to four pin coiled light cable, the four pin end wires pulled out after one season.Does any one know of a way to provide strain relief for this end. The seven pin end has strain reli...
Forum Discussion
Captjack wrote:May do something like that,took it apart the wires had pulled out from plug.Repaired it, for the price it should have strain relief.
If you are talking about the round 4 pin connector, it is very problematic with poor or no strain relief. I have lost count of the number of times I have had to make up the end that goes to the toad. The last time I rebuilt it I used silicone self sticking tape to make a long transition from the connector body to maybe 6 inches down the cable that provides some strain relief. No problems for the last 10K miles. Never pull on the cable to disconnect.
