Brake master 9100 problem
12 volt feed from ignition power source not providing 12 volts to air compressor. Of course, no compressor, no brakes. System installed on 2006 pace arrow in 2006 and has always worked great. My probl...
Forum Discussion
Not what you're asking but you might consider:
My compressor is wired (via fuse) through an under-dash toggle switch to the battery. Not ignition-switched. Just in case you need to rewire it.
My compressor is wired (via fuse) through an under-dash toggle switch to the battery. Not ignition-switched. Just in case you need to rewire it.
