Broke Swivel Stik end in black tank. Oops.
Little background; we're going full time in July and just bought our first fifth wheel. Never really been in one before, except the one we bought so we're complete novices. We'll we got it home an...
Forum Discussion
John&Joey wrote:
I will repeat myself one more time. Leave the black valve open, put the cap on the end of the run and go take the rig for a drive. Very likely it will bounce and follow the slant of the tank and then the pipes. Very possible when you take the end cap off, it will be right there.
I know you said it won't make it past a 90 elbow, but that is impossible in my mind. If it fits in the toilet all the other pipes are the same size.
Also you stated "other" stuff is coming out, that tells me you need to do some work above and beyond the flushing fitting.
But are there any 90 degree turns from the toilet to the tank? It may go through a gentle curve but not a 90 degree turn. I've been playing with the Pythagorean theorem here, and it seems something an inch or so in diameter and even 6" long wouldn't fit through that corner.
Nonetheless, it seems a reasonable experiment to try before tearing into it.
