Cable vs Roller/Rail slideouts

In my opinion the bal cable slide is the better one.

1. Either will give you thousands of cycles with proper maintenance.
2. Not in my opinion.
3. IDK.

Cable slide are way more trouble prone. Hydraulic is the best, electric is next, cable far third.
Cables tend to stretch, get out of alignment.

Well if you look at the past few years, a while back seems everyone was using the Schwintek slide system, but now some of the top brands, like DRV have switch to the BAL Accuslide cable system.
Have good friends who got their unit a year after ours and have had several motors changed in their Schwintek slides. Ours has the BAL Accurslide and no issues in 3 1/2 years of almost full time use.

donn0128 wrote:
Cable slide are way more trouble prone. Hydraulic is the best, electric is next, cable far third.
Cables tend to stretch, get out of alignment.

X2

Many factors determine what type is used and where. Mine: BR cabinets cable, BR bed electric, kitchen heavy hydraulic, dining heavy drop down hydraulic.

Quality of the build and equipment is the most important consideration.

I prefer electric, Fewer components, but electric can have motor and gearbox issues.
Hydraulic involves several components that can be problematic (pump, valves, lines, rams).
Least favorite is cable. Cable has motor and cable issues, but biggest issue is the cables themselves= they are a major pain to adjust, and they do need adjustment as cables stretch, whereas hydraulic and electric don't require much readjustment.

Cable slides are awful. We had one and it got out of alignment and the huge RV dealer Guaranty RV in Junction City Oregon could not fix it. They used to only be in cheap trailers. I don’t think anyone else is using them in today’s market.

Great information folks! Thanks for the replies!
I should have said we are looking at TTs.

Our trailer has the electric roller slides. Two of them, one a long "superslide". After 8 years of use, almost 40K miles on the trailer, Probably pushing 1000 extension/retractions and using it 90+ days/year the slides have never ever given us any issues. Always easy peasy work as they should.

My previous camper, Outback 298RE (same as ktmrfs, except it had the bedroom slide closet) had both. The closet slide had the cable driven, the living room slides were the roller gear on a track type. We had the camper 5 years and never had any problems or issues with either type. Not a single issue with either.

I was very anal though with one step in setting up camp. Before any slides were extended, the camper was always level and the stabilizer jacks were down. And jacks stayed down until the slides were retracted. I never, never deviated from this process.

Those times we stopped for an over night and did not unhitch, I still put the stabilizer jacks down and leveled as accurately as possible. End results, my slides (both types) worked great and I NEVER touched anything or did anything to adjust or change anything on them. Factory installed worked just fine for 5 years until we traded for our current camper.