Forum Discussion
Olddud
Sep 12, 2013Explorer
I installed a charge line from my Winnebago Cambria through the 7 pin connector and then to the battery, using 12ga. wire. It is fused at 10amps at the battery.
Recently, I had a Brake Buddy failure where it ran continuously for 30 minutes and nearly burned up the connector inside the Jeep. The fuse held on the charge line. So the charging line must have never exceeded 10amps. I have since wired a new connector made for the purpose for the BB.
Recently, I had a Brake Buddy failure where it ran continuously for 30 minutes and nearly burned up the connector inside the Jeep. The fuse held on the charge line. So the charging line must have never exceeded 10amps. I have since wired a new connector made for the purpose for the BB.
About RV Tips & Tricks
Looking for advice before your next adventure? Look no further.25,102 PostsLatest Activity: Jan 18, 2025