Did my Andersen No-Sway WDH do this???
Or did the trailer service center? I'm not sure, what caused it, but after hooking up last night I noticed chunks of aluminum on the ground under my setup. I had just got my trailer back from serv...
Forum Discussion
There really isn't much reason for quality welds on those end caps. They are just there to keep debris from collecting in the tubes. Many trailers aren't even capped like that.
BTW, most larger RV dealer don't mount the ball directly to the folks. It violates both ANSI and OSHA standards, which means if they lease their forklifts it will be explicitly not allowed by the forklift dealer (to the point the larger chains won't even service them if the forks are modified). Fork adapter simply work better because they are less likely to interfere, and they will work with customers hitches like a Hensley.
BTW, most larger RV dealer don't mount the ball directly to the folks. It violates both ANSI and OSHA standards, which means if they lease their forklifts it will be explicitly not allowed by the forklift dealer (to the point the larger chains won't even service them if the forks are modified). Fork adapter simply work better because they are less likely to interfere, and they will work with customers hitches like a Hensley.
