dingy induced sway
I recently set up our 2019 Ford Fusion Energi to flat tow. Setup is as follows: baseplate: Roadmaster towbar: Roadmaster Stowmaster 5000 (car mounted) hitch on motorhome: 10" drop hitch with 2" ...
Forum Discussion
Alan_Hepburn wrote:
Have you tried adding a "de-rattler" at each of the interfaces between hitch and receiver? There is some play at those joints and that can cause stability issues. The de-rattler will eliminate that play.
I have tried almost every Anti Rattle device on the market, most have been no good or so complicated and cumbersome that they are useless. I have a whole tool box full of them.
Until I found the one at Hitch Rider. This will keep everything tight. No back and forth or up and down,as most others only pull tight in one direction.
Their Hitch Vice is the best and easiest one I have come across and it really works,nothing moves.
