dingy induced sway
I recently set up our 2019 Ford Fusion Energi to flat tow. Setup is as follows: baseplate: Roadmaster towbar: Roadmaster Stowmaster 5000 (car mounted) hitch on motorhome: 10" drop hitch with 2" ...
Forum Discussion
DouglasC wrote:
I have a similar setup towing a 2019 Ford Fusion Energi with a Ford E450 Class C motorhome. I am amazed that you need a 10" drop hitch. The rear of your motorhome must sit rather high. My Roadmaster tow bar goes directly into the hitch receiver on the rear of my motorhome and the tow bar is within 2" of being perfectly level. Bottom line - - I have experienced none of the issues that you seem to be dealing with and I've towed my Fusion Energi over 12,000 miles with this setup. Sorry to not be of more help.
Interesting, as our motorhomes are about the same size. A 10" drop brings the tow bar almost completely level. It may be slightly apples to oranges as I have a car mounted bar that goes on a trailer hitch ball, as opposed to the more common motorhome mounted bar that goes directly into the receiver. Not sure how much of a height difference that would be, if any. Same baseplate, so I'd think the height of the tow bar itself is probably the same.
