You are correct. But I bet I could have figured that out all by myself ! :R
mowermech wrote:
Actually, you CAN tow your 4x4 Jeep on a dolly. If you REALLY, REALLY want to!
All you need to do is get under it and remove the rear driveshaft from the rear differential yoke after you put it on the dolly. you can remove the shaft completely, or simply tie it up to the underbody.
It is just that simple!
I once had a Datsun 4X2 pickup that I towed. I had to disconnect the drive shaft to tow it. It took about five minutes.