Domedic refrigerator
My domedic refrigerator in my Winnebago Class A, still works on propane, but it won't work on electric. Fuse tested good. Any other idea's why I can't get it to work on electric? Mema
Forum Discussion
Model of refer?
Verify there is 120 volt in recptacle that powers refer in the outside refer access.
Check for 120 volts AC on circuit board output to the element.
Check the element for continuity if there is 120 volt output.
Power to outlet and no power to element would indicate circuit board failure. Remove circuit board and look for burnt area on the back of it.
If you need new circuit board I would suggest Dinosaur Electronics.
Verify there is 120 volt in recptacle that powers refer in the outside refer access.
Check for 120 volts AC on circuit board output to the element.
Check the element for continuity if there is 120 volt output.
Power to outlet and no power to element would indicate circuit board failure. Remove circuit board and look for burnt area on the back of it.
If you need new circuit board I would suggest Dinosaur Electronics.
