Dual cam VS Equalizer...I have both
So here is my humble Opinion. I just picked up a TH that came with a the four point equalizer hitch(1200# bars)so I just used that to tow home over 300 miles and it towed great, mind you that was and ...
Forum Discussion
BarneyS wrote:dodge guy wrote:
Snip... I`m sorry to say that there is no sway control effect from the attachment points at the hitch head. it would take quite a bit of side to side trailer movement for those 2 points to help out that it would be to late!
I`ll go with the DC every time!
Dodge guy,
Those bar sockets on the Equal-iz-er provide the MAJORITY of the sway control on the hitch. There is a tremendous amount of friction developed between the upper surface of the bars socket and the lower surface of the hitch head when the WD bars are drawn up on the L brackets, plus there is a pinch bolt that is tightened to a specific torque that squeezes down on the sockets.
The friction of the bars and the L brackets surface is a secondary point of sway control. Hence Equal-i-zers claim of "4 point" sway control - two bar sockets/hitch head contact and two L bracket/wd bar contact.
Barney
I'm not sure how the friction points at the sockets could provide friction when EQ advises greasing them. Only thing you do is torque them to 45-65lbs IIRC. After driving any lengthy distances and unhitching the bars are movable by hand. I've torqued them to 65lbs and they are hard to move. Get to the CG and they move easily.
To the OP I don't think you can just get #1400 bars as they aren't interchangeable on EQ's.
