Equal-i-zer or Andersen?
Before you think this is another which one is better survey let me share my experience. I bought a lightweight, 25 foot,3500 pound(empty) tt last year and the dealer installed an Equal-i-zer 12k hitc...
Forum Discussion
gijoecam wrote:
There were several early-adopters of the Andersen on here a while back that posted a lot of data. The general consensus, IIRC, was that once the trailer gets north of the 5000lb mark, it had a difficult time transferring enough weight off the tongue to balance the weight distribution adequately. (There were also concerns with long-term wear and stresses applied to the coupler latch that, in my opinion, were never adequately resolved through some type of analytical testing on the part of the manufacturer... They designed a great component for their part, but their part is only one half of the system)
This was definitely a concern of mine when I read this in other forums. I am having a hard time finding many 2014-2015 posts or discussions and was just curious if Andersen had addressed any of these concerns.
