Falcon All Terrain and RVI
What's everyone's .02 on this particular setup. RV hopefully will be 1998 Fleetwood Discovery pulling a 2004 Honda Pilot. How hard is it to install this stuff or do I just pay to have it install...
Forum Discussion
Depending on what needs to be done it can be easy or hard.
You may need to cut some plastic from the bumper or front moulding, and or drill at least a couple of 1/2 inch holes.
It also entails partial dissasembly of the bumper, grill and or head lamps.
You can also intall the plugh for the lights and or the brake system if so desired.
If you are handy with tolls, be prpared to spent at least one day or more, I do not recomend having beer's until after the install, it is important that the job be done right, you may loose the vehicle.
navegator
You may need to cut some plastic from the bumper or front moulding, and or drill at least a couple of 1/2 inch holes.
It also entails partial dissasembly of the bumper, grill and or head lamps.
You can also intall the plugh for the lights and or the brake system if so desired.
If you are handy with tolls, be prpared to spent at least one day or more, I do not recomend having beer's until after the install, it is important that the job be done right, you may loose the vehicle.
navegator
