Fibreglass wall laminate separating??
We must have gotten moisture inside the wall and the thin wood that the fibreglass is glued to has come apart. So the wall is bubbling. How to fix? [img] [/img]
Forum Discussion
Just to share my experience. Many places in my 2003 Winnebago Mini 24V had delamination. Spent many hours repairing.... Used expanding cargo bars and wood plates against my barn to hold it. Used Gorrilla Glue (urethane and waterproof) After the delam. was rapaired. I put the molding back. Where the corner molding was curved in the front areas, I caulked with proflex then covered the corner with slit down eternabond then put the moldings back on. On the straight corners, made wider molding from ripping down PVC square fence posts and predrilled the screw holes. That fence post is available at home centers. Looks ok.....In most places, the original corner molding is way too small to provide any support/strength at corners....
