For those of you with Propride P3 hitches...
On my Propride P3 hitch, I have the adjustable tilt pin at the bottom to prevent the stinger from tilting down. That leaves about a 1/4" gap at the top. Is there any reason I couldn't put a steel wedg...
Forum Discussion
RobWNY wrote:
Sean replied to my email much faster than I anticipated! Great Customer support! Here's what he had to say when asked about putting in a steel wedge ...."You could do that or, if you don't need the tilt feature, you can put the top bolt in the hole rather than the slot, or put a 4th 5/8" bolt through the hole".
Great service and on a Sunday!
Thanks RobWNY for posting Sean (Propride) reply.
