Ford Explorer transmission problems
The last few times after towing my Explorer it has been stuck in 4 wheel low. It remains in that position for about 5 minutes and then switches to normal drive. This is a recent problem, I have always...
Forum Discussion
Thanks for the advice I will try unplugging Replugging as you suggested.
As to the post from Newlee I follow the steps exactly as stated in the driers manual.
1 depress brake turn ignition to on (not start) or move shift out of neutral
2 neutral tow light will turn off
3 start engine shift to drive
As I noted in my last post this afternoon it worked properly, so I tend to agree with braindead0 that it is electrical.
Thank you all for your input!
As to the post from Newlee I follow the steps exactly as stated in the driers manual.
1 depress brake turn ignition to on (not start) or move shift out of neutral
2 neutral tow light will turn off
3 start engine shift to drive
As I noted in my last post this afternoon it worked properly, so I tend to agree with braindead0 that it is electrical.
Thank you all for your input!
