Ford SD trailer hitch problem
Recently I noticed my trailer hitch has had a problem. A "klunk" when accelerating. A close inspection revealed that the hole for the tow bar retaining pin has elongated causing excess slack, ther...
Forum Discussion
trail-explorer wrote:
Ditch the OEM hitch and get a Torklift SuperHitch. They have a big thick flat washer welded to the hole as a reinforcement.
ALso ditch the angled hitch pin. The angled end is partly the cause of the problem. Actually is most of the problem.
Get a straight style locking hitch pin.
Yep forgot about the Torklift. As far as the angled hitch pin. No. mine only ever went in one way and it was worn on both side of the receiver tube! Besides an angled pin will not wear through the hole evenly. It would wear on the outside edge only.
