grab handle
The handle you grab to go up the steps into the trailer is very loose. Two of the screws are coming out. It doesn't do any good to tighten them as they seem to be stripped. Any ideas as to how to t...
Forum Discussion
Lynnmor wrote:
The stud might be aluminum tubing, check before using wood and wood glue. Matchsticks will only work on wood studs.
True. In that case, larger screw is the easy answer.
A variation to the match stick that works good too is stranded elect wire. Leave insulation on it. Same principle.
Or the fill with glue, epoxy etc. let it set up and re drill new holes. Again only for wood
