Has anyone seen a Roxor used as a towed?
I have watched a few You tube vid's https://www.youtube.com/watch?v=ITzj8r-95BU and visited the site from Mahindra https://www.roxoroffroad.com/roxor-offroad-vehicles I understand that some mod...
Forum Discussion
Sam's were portal like your picture shows. Reason I know was the inherent friction of the portal seals acted like a steering damper on them and I replaced mine more than once. Sam's used a 2 piece seal with a felt backer and a ring clamp arrangement to secure the portal seals.
My F350 is a high pinion Dana 60 open knuckle and needs an external damper. only thing I never liked about the open knuckle design is the close fit between the lower joint and the universal, necessitatiig a special zerk fitting (which I have to grease them with.
I'd buy a Polaris Razor before a Roxon myself.
My F350 is a high pinion Dana 60 open knuckle and needs an external damper. only thing I never liked about the open knuckle design is the close fit between the lower joint and the universal, necessitatiig a special zerk fitting (which I have to grease them with.
I'd buy a Polaris Razor before a Roxon myself.
