Head assembly adjustment?
I had my hitch system replaced by my car dealership because of a recall. Now my popup trailer (Forest River HW277) has an eight degree slant forward and down. I will adjust my head assembly height to ...
Forum Discussion
If you are not using any weight distribution with your pop-up then the only thing you need to be concerned about is the torque on the mounting bolts of the shank/hitch head. Usually around 300-400ft/lbs
If you are using WD, then I would check that the WD is what you want it to be and adjust if necessary. Probably will not need any adjustment though.
Barney
If you are using WD, then I would check that the WD is what you want it to be and adjust if necessary. Probably will not need any adjustment though.
Barney
