Here we go, another EZ lube debate!
I am the owner of a 2011 Keystone Sprinter with EZ lube hubs. I have been using the zerk fitting for annual greasing using a manual gun for 5 years. I also perform annual manual brake adjustments. ...
Forum Discussion
I used the EZ lube zerts on my RV last summer. I did it by the book and I had one seal leak. Just got through replacing it.
Fortunately I have disc brakes and they were not compromised. I cold see the grease on one of my level up jacks is what got me to looking.
Although I am a little disappointed about the failure I am still going to use this method to grease my bearings because I can see my seals without removing the wheels.
If you have the drum brakes a little extra caution is justified in my mind.
Fortunately I have disc brakes and they were not compromised. I cold see the grease on one of my level up jacks is what got me to looking.
Although I am a little disappointed about the failure I am still going to use this method to grease my bearings because I can see my seals without removing the wheels.
If you have the drum brakes a little extra caution is justified in my mind.
