Here we go, another EZ lube debate!
I am the owner of a 2011 Keystone Sprinter with EZ lube hubs. I have been using the zerk fitting for annual greasing using a manual gun for 5 years. I also perform annual manual brake adjustments. ...
Forum Discussion
Lynnmor wrote:
I suggest just doing it right when you do the annual bearing inspection and forget the useless and troublesome grease fitting.
Ditto.
There really is no need to continually pump new grease in the fitting. The grease that is in there doesn't get out (or go away). Do periodic dissemble, clean/inspect, repack the bearings, all is good.
Then go camping.
