Here we go, another EZ lube debate!
I am the owner of a 2011 Keystone Sprinter with EZ lube hubs. I have been using the zerk fitting for annual greasing using a manual gun for 5 years. I also perform annual manual brake adjustments. ...
Forum Discussion
Hannibal wrote:Cummins12V98 wrote:Hannibal wrote:
I think some of you fellers aren't familiar with the EZ-Lube axles.
https://www.youtube.com/watch?v=XT0RKDGgDm8
Good video! Notice he said "MANUAL" grease gun.
Absolutely do not use a pneumatic grease gun for wheel bearings or ball joints for that matter. And if you feel more than just a little bit of resistance, stop and figure out why. Make sure your grease is compatible with the existing grease as well.
So true, when pumping grease into my MC trailers EZ Lubes I did not really feel much if any difference once the cavity was filled.
