Here we go, another EZ lube debate!
I am the owner of a 2011 Keystone Sprinter with EZ lube hubs. I have been using the zerk fitting for annual greasing using a manual gun for 5 years. I also perform annual manual brake adjustments. ...
Forum Discussion
Hi just to let you know that on my 3axle I did all the wheel bearing and replaced all seals. All the bearing looked great.one seal was seeping a little , but it did not get on brakes. I did use 6 cans on break clean, one for each wheel.Took my time cleaned and repack the hubs.Packed the bearing by hand.Start to finish may be 6 hrs total.
Now just to clean up
Now just to clean up
