Here we go, another EZ lube debate!
I am the owner of a 2011 Keystone Sprinter with EZ lube hubs. I have been using the zerk fitting for annual greasing using a manual gun for 5 years. I also perform annual manual brake adjustments. ...
Forum Discussion
If anyone thinks doing a bearing repack is a hassle, you should try replacing bearings... The bearing cup that is in the drums are extremely hard to remove because there is almost no protruding lip on the cup to get a drift onto.
I just did four and did not have any problem. maybe your drift is too soft or more patience was in order.
I just did four and did not have any problem. maybe your drift is too soft or more patience was in order.
