Honda CRV
I'm looking to downsize my tow vehicle, yet I want something big enough for four adults, usually the larger men up front and smaller women in the back....not being sexist, just the way we travel. ...
Forum Discussion
Depends on which brand base plate. I used Demco. Not hard. Had to drill 2 holes which you need very good bit for. Tempered steel frame. Had to squeeze the power steering cooler. Had to cut a few plastic tabs to allow the towing tabs to go through.
Taking the bumper cover off is intimidating but not hard. Lots of buttons and a few screws. Worst thing is I set it next to the car on the concrete and a gust of wind blew it over and it got a few minuscule scratches.
Next one I did, I sat it on a old bed spread and wrapped it up while it was off.
Hint; go to the junkyard and get a horn off of a Honda Accord and add it next the single factory horn while the cover is off.
Taking the bumper cover off is intimidating but not hard. Lots of buttons and a few screws. Worst thing is I set it next to the car on the concrete and a gust of wind blew it over and it got a few minuscule scratches.
Next one I did, I sat it on a old bed spread and wrapped it up while it was off.
Hint; go to the junkyard and get a horn off of a Honda Accord and add it next the single factory horn while the cover is off.
