I am mad....

deppeler wrote:
I just purchased a 241rbsl form a dealer in Indiana.
I live in Oklahoma.
We traveled up there (1900 miles round trip) to see the TT, do a walk through and sign papers. This was about 2 weeks ago.
As I had never pulled a TT before (and it was a fast trip) we decided to get them to deliver it to us here in Oklahoma (even with this cost it was still below local - 100 miles away dealers).
They delivered the TT Friday (Oct 31) in the evening.
I gave it the once over and everything looked fine.
Sunday I was inside just checking it out when I noticed the slide (sofa) was touching the floor on one side while the other side was 2 - 2/12" higher. I contacted the dealer who had me look under the sofa (he thought a roller might have come off its track) and I took some photos.
I couldn't see any issue with a roller but the timber that holds the slide against the wall which has self tapping bolt(s?) had split and the bolt was hanging out.

It appears that the split wood with the bolt angled down is supporting it after the top bolt fell out. It sure looks like the top bolt hole is there. Based on that, I would think that repairing that by lifting it up and putting a top bolt in and then adding a vertical brace would perhaps solve the problem?