Is this normal
Many of you have helped me along as a new owner and I appreciate it. I have something else to throw at you all. I added a Acculevel to my pin box. Now I notice what can best be described as flexing....
Forum Discussion
enblethen wrote:
The photos show the pin box is pivoting. The bolts are not tight enough.
Can you locate make and model of pin box? The installation instructions should show torque.
Looks like bolts could be 5/8 which need to be tightened to at least 160 ft lb or maybe 3/4 that need to be tighten to 210 minimum.
Trailair pin box instructions.
All of that, and in my eye the bolts currently holding it may not be the correct diameter, the empty bolt holes should line up, and they don't!